Eheim Aquaball 180 (was 2212) – 2403510
Eheim Aquaball 180 (was 2212) – 2403510
- 70 % Off$15.60
Description
The ball is the trick. The round pump head sits in a ball joint. This enables adjustment of the outflow direction as required. The flow rate is set by the output regulator. And the power-diffusor adjusts the air flow.
Due to its modular system the filter volume can be customised as required. The filter baskets are easy to clip in and remove and can be filled with a variety of filter media.
all-round adjustable pumphead to direct the outflow as requiredfitted with power-diffusor for strong oxygen enrichment and a wide jet nozzle for natural surface water movementmodular construction –for customised filter volume as required – for cleaning at different intervals to preserve bacteria culturesEasy removal and return of filter baskets with Easy-Klick locking systemThe filter baskets can be filled with different filter mediaEven water suction on all sides over almost the whole outside surface areaThe filter holders are secured to the glass with suction cups; the filter is easy to removeSuitable for aquariums with light to moderate stocking (few fish 2-6 cm); for fresh or marine waterComplete with original EHEIM Filter media and ready for use
Directly under the pumphead is a mediabox. It can be filled with:
a filter pad for mechanical-biological filtration,a fine filter pad for fine filtration/polishing,bioMECH or SUBSTRATpro for biological filtration orEHEIM AKTIV for adsorptive filtration.
Also biological as well as adsorbtive filter cartridges or filter pads can be placed in the other filter modules.
Aquaball has a modular construction. This means that by adding or removing filter modules (filter baskets) you can adjust the filter volume as necessary.
For extending the filter use ExtensionSET2The filter baskets can be easily clipped together and released (Easy-Klick Locking System)Due to the modular construction the filter cartridges or media can be cleaned at different intervals thus preserving bacteria cultures.
Aquaball sucks in water over a large surface area. The round filter modules are designed so that the water is absorbed evenly from all sides over almost the whole surface area.
The holder for aquaball is simply fixed to the glass with suction cups. For cleaning, exchanging modules or filling with filter media, the filter is simply removed from its holder.
Specification: Suitable for tanks from 100 to 200 litres 650 l.p.h output 6 watt motor Length : 270 mm Diameter : 96 mm
Additional information
Title | Default Title |
---|